Process Indicators

The Dynisco Melt Monitor series of indicators is a melt pressure sensor with an integrated digital display.

Melt Monitor Series

The Dynisco Melt Monitor series of indicators is a melt pressure sensor with an integrated digital display. It has the option of optional temperature measurement. The construction is made of stainless steel, which was designed for the strict environment of the polymer industry. Standard features include digital zero calibration and extreme display on the indicator display. It is easy to operate with accurate pressure measurement over the entire measuring range. Thanks to the optional built-in temperature sensor, the display is able to display pressure and temperature in one place at the same time.

Melt Monitor Series

Melt Monitor Series

Melt Monitor Series

Melt Monitor Series

Inquiry system 

Configure your own product according to your requirements and needs. If you are unsure of the configuration, provide us in the notes the necessary information about the existing sensor or product, even a competitor. We will be happy to help you find an alternative Dynisco product. If your request is urgent, let us know. We will do our best to help you resolve this situation to your satisfaction as quickly as possible. If we have all the information, we are able to offer a model with minor differences, which is in stock and you can have another product available the next day.

If you need more information do not hesitate to contact us.

Configuration code

Your personal data will be processed according to Terms of personal data processing..

Performance characteristics:


5000 psi, 10 000 psi a 15 000 psi
Pressure accuracy:
Temperature accuracy:
  Sampling speed: 50 mS
  Power source: Universal 110/220 Vac or 24 Vdc (optional)
  Display 5-digit LED, 0.5 "primary and 0.4" secondary
  Pressure units: PSI, bar, MPa or kg / cm2
  Distinction: 1 PSI, 0,1 BAR, 0,01 MPa or 0,1 kg / cm2
  Temperature: °C or °F
  Distinction: 0.1°C or 0.1°F

Temperature and mechanical properties:


Electronics temperature:
0 up to 70°C
Maximum membrane temperature:
750°F  (400 ° C)
Less than or equal to 80%
  Bridge connection: 4 or 6 wires (6 for using an external starter switch)
  Optional temperature / Compensation: 20 až 325°C
  Electrical termination: 1-3 pin connector (included)
  Weight: 2.5 to 3.5 lbs.


Transducer Mounting Hole Cleaning Tool Kit

Installation of transducers into improperly cleaned or sized holes is one of the major causes of damage to these instruments. With this kit, the .312" tip diameter hole, the 45 degree seating surface, and the .451" hole can be cleaned. The kit includes a gauging plug which is used to verify that the hole has been correctly machined and cleaned. M10 and M18 cleaning kits also available.

Transducer Mounting Hole Machining Tool Kit

The Dynisco Transducer Mounting Hole Machining Tool Kit contains all of the necessary drills and taps to prepare a standard 1/2 - 20 UNF transducer mounting hole and the 45 degree seat. All tools included in this kit are made of premium grade, high strength tool steel. Care should be taken in the use of proper speeds and feeds, lubricants, and a method to assure continual alignment of each progressing tool. M10 and M18 kits are also available.

Certification Approval


CE Compliance Statement

ISO 9001:2015

EAC - The Eurasian Conformity mark