Pressure sensors

Melt Pressure Sensor - PT460 Series | PT462 | TPT463

PT 460 | 462 | TPT 463

The Dynisco PT460E Series is a ± 1.0% sensor ideal for melt pressure applications that require easy installation, repeatability and reliability. The PT460E transducers provide an industry standard 3.33 mV/V signal that is designed to work with most pressure indicators. The PT460E is equipped with a 6-pin Bendix connector. Optional thermocouples or RTD configurations are available to provide melt temperature and pressure in one location. The PT460E is UNF 1/2-20 threaded for mounting in the standard mounting holes of the transmitter and can be supplied with a number of other electrical connections if required.

PT 460 - Melt pressure sensor in a design with a fixed stem

PT 460 - Melt pressure sensor in a design with a fixed stem

PT 462 - Melt pressure sensor in a design with a flexible capillary

PT 462 - Melt pressure sensor in a design with a flexible capillary

PT 463 - Melt pressure sensor in combined design with temperature sensor

PT 463 - Melt pressure sensor in combined design with temperature sensor

MDA 460 Melt pressure sensors series

MDA 460 Melt pressure sensors series

Standard process connection of 1 / 2-20 UNF sensor with diaphragm cover.

Standard process connection of 1 / 2-20 UNF sensor with diaphragm cover.

Adjusting screws - used to adjust the zero and upper range of the sensor

Adjusting screws - used to adjust the zero and upper range of the sensor

Sensor terminal and compatible cable connector

Sensor terminal and compatible cable connector

Detail - Bayonet cable connector Amphenol 6-PIN

Detail - Bayonet cable connector Amphenol 6-PIN

PERFORMANCE CHARACTERISTICS

Pressure range:
0 - 30 000 psi
Accuracy:
± 1.0% FSO, (including linearity, repeatability and hysteresis)
Overload capacity:
2X FSO or 35,000 psi, (whichever is less)
  Repeatability: ± 0.2% FSO 
  Sensor diaphragm:  Dymax® 15-5 PH SST
  Sensor connection: 1/2"-20 UNF-2A nebo M18 x 1.5
  Mounting torque: 500 inch/lbs. maximum
  Sensor construction: Fixed rod sensor (optional length)

TEMPERATURE CHARACTERISTICS

Max. membrane temperature:
540°C
Zero shift (due to temperature):
27 psi/100°C
-------------------------------------------
------------------------------------------------------------------
  Max. sensor body temperature: 121°C
  Zero shift (due to temperature) ± 0.02% FS/°C max
  Displacement sensitivity (due to temperature) ± 0.01% FS/°C max

ELECTRICAL CHARACTERISTICS

 
Power supply:
10 Vdc - 12 Vdc
Output signal:
 3.33 mV/V ± 2.0%
Zero setting:
± 10% FSO
  Connector: 6 PIN konektor Bendix
  Insulation resistance: 1000 megohms @ 50 Vdc
  Resistance calibration (R-Cal): 80 % FSO

ROZMĚRY SNÍMAČE:
 

EU Declaration of Conformity for Flush Mount mV/V  Output

ISO 9001:2015

EAC - The Eurasian Conformity mark 

GOST Approval 

RoHS Compliance Fact Sheet

Safety Integrity Level - SIL2