Pružanje inovativnih rješenja
S više od 6 desetljeća posvećenosti pomaganju klijentima, Dynisco pruža alate i usluge za industriju polimera omogućavajući klijentima "prozor u proces".
Današnji klijenti zahtijevaju točne informacije koje će im omogućiti validaciju i, ako je potrebno, prilagodbu njihovog procesa kako bi osigurali da proizvodi koje proizvode zadovoljavaju ili premašuju njihove specifikacije. Informacije koje Dynisco pruža omogućuju našim klijentima održavanje dosljednosti procesa bez obzira na njihovu globalnu lokaciju.
Raznovrstan portfelj Dynisco senzora i opreme za testiranje polimera pruža neke od najtočnijih informacija dostupnih na tržištu za mjerenje polimerske reologije, tlaka i temperature.
Dynisco svojim klijentima omogućuje povezivanje podataka dobivenih iz pilotnih projekata i laboratorijskih okruženja s online proizvodnjom, 24 sata dnevno. Ovi podaci omogućuju trenutnu reakciju i prilagodbu kritičnim parametrima kako bi se osiguralo da se svaka odstupanja promptno isprave radi jamčenja kvalitete i maksimiziranja proizvodnje.
Povijest Dynisco
Poznata diljem svijeta po inovativnim proizvodima za mjerenje tlaka i temperature u industriji plastike, Dynisco već 60 godina razvija inovativna visokokvalitetna rješenja za obradu ekstruzije plastike zahvaljujući stručnom timu inženjera s prosječno 15-20 godina iskustva. Senzori, kontroleri i analitički instrumenti Dynisco dokazali su se pružanjem bolje kontrole, smanjenja vremena zastoja, minimiziranja otpada te neusporedivom pouzdanošću i radnim vijekom. Naša predanost i sposobnost suradnje s vama kako bismo vam pomog li mjeriti, analizirati i opremiti sustave za upravljanje ekstruzijom koji odgovaraju vašim točnim potrebama su neusporedivi. Od inovativnih tehnologija u najkompletnijoj liniji senzora do renomirane kvalitete i performansi indikatora, kontrolera i analitičkih instrumenata.
Senzori Dynisco specifično su dizajnirani za zahtjevno okruženje industrije plastike, a Dynisco je razvio neke od najinovativnijih rješenja za mjerenje u ekstruziji plastike, brizganju i procesnoj kontroli. Proizvodimo širok raspon robusnih senzora za mjerenje tlaka u obliku mV/V, mA, VDC i HART-kompatibilnih senzora za taljenje, zahvaljujući izvrsnosti inženjeringa i iskustvu.
Analitički instrumenti Dynisco
Kvaliteta procesa započinje s upotrebom materijala. Analitički instrumenti Dynisco omogućuju procesoru provjeru specifikacija materijala i optimizaciju uvjeta procesa. Ti instrumenti uključuju uređaje za mjerenje protoka taline, kapilarni reometar i male laboratorijske sustave za miješanje i ekstruziju. Dynisco također nudi najpotpuniju i najtočniju liniju online reometara dostupnih na tržištu danas.
Dynisco nudi potpunu globalnu uslugu i tehničku podršku za svoju cjelokupnu liniju proizvoda. Duzine tehničke podrške s visokom stručnošću stacionirane su diljem svijeta kako bi pružile:
- Stručno savjetovanje
- Prilagođena rješenja
- Dijagnostiku i otklanjanje problema na licu mjesta
- Popravak i održavanje pretvarača
- Usluge instalacije
- Obuku operatera za opremu
- Popravak sustava, zamjenske dijelove, preventivno održavanje i još mnogo toga
Klijenti diljem svijeta oslanjaju se na Dynisco zbog inovacija proizvoda i naprednih sustavnih rješenja koja značajno utječu na učinkovitost njihovog proizvodnog procesa.
Melt Flow Indexer LMFI55-2NENNCN
This LMFI5500 series Melt Flow Indexer allows the measurement of most rheological parameters of thermoplastics including IV for PET. The LMFI 5500 series is one of the most accurate equipment of the type in the world. The intuitive controls make it easy to use, it has an expert mode for experienced operators that significantly speeds up the measurement process, and sophisticated features and technologies ensure the highest possible measurement accuracy. Gravity correction and dual zone heating not only meet but exceed the requirements of the latest ISO1133-2 valid standard.
This model is perfect for quality control in a laboratory, institutes or universities where accuracy really matters. Try the LMFI 5500 and get a reliable and accurate instrument that will allow you to improve the quality of your products.
GRMT
Dynisco GRMT is a temperature sensor that differs in the possibility of extending and inserting the measuring probe into the melt stream. This makes it easy to change the scanning position of the sensor. This temperature sensor is used to measure the temperature inside the melt stream. The depth of immersion of the tip in the hot melt stream can vary even at maximum flow and pressure conditions without removing the sensor.
Extendable tip
Movement range 0-65 mm
Applicability up to 480°C
Pressure range 1000 Bar
Thread 1 / 2-20 UNF
DYKE
The Dyke DYKE temperature sensor is specially designed to meet the requirements of the polymer industry. The flexible design of this series allows use in both extrusion and injection molding processes. The mounting thread is compatible with the threads used in pressure sensors. Therefore, DYKE can be used in most extruders. As an alternative to the DYMT series. The DYKE series offers the possibility of thermal insulation. These temperature sensors are suitable for use with materials with abrasive fillers such as glass fibers, etc.
Conical tip
Up to 1000 Bar
Various TC and RTD
Optional threaded connection
Optional ceramic insulation
SPX-5 Series
The SPX 5 Series is an intelligent range of sensors with a 4-20 mA output signal that incorporates DynalarityTM technology. Dynisco's innovation uses an advanced logarithm that linearizes fluctuations due to process effects on the sensor.
4-20 mA output signal
Accuracy better than 0.25%
Turndown 6 - 1
Optional configuration for use in potentially explosive atmospheres
Remote configurability via HART communication
Compatible for DSC or PLC systems
SPX-4 Series
The Dynisco SPX-4 Series is an intelligent pressure transmitter with a 4-20 mA output signal designed for use in hazardous, potentially explosive environments and is available with a variety of process and electrical connections.
4-20 mA output signal
Accuracy better than 0.15%
Turndown 6 - 1
Optional configuration for use in potentially explosive atmospheres
Remote configurability via HART communication
Compatible for DSC or PLC systems
SPX-T - 3 Series
TSPX-T (Series 3) is an intelligent series of sensors that includes temperature compensation and Dynisco Innovation - DynaLarity ™. The SPX-T delivers the most powerful sensors in the range. Temperature compensation is based on RTD measurements that compensate for temperature changes that reduce temperature variations and increase accuracy. There is no need to perform a temperature calibration after installing the sensor. 4-20 mA output signal.
4-20 mA output signal
Accuracy better than 0.15%
Turndown 6 - 1
Optional configuration for use in potentially explosive atmospheres
Remote configuration ability via HART communication
Compatible for DSC or PLC systems
SPX-2 Series
The SPX-2 series is an intelligent pressure transmitter with a 4-20mA output signal designed for demanding applications and is available with various processes and electrical connections.
The SPX - 2 series is a robust welded construction and certified for use in the explosion hazard zone.
4-20mA output signal
Accuracy better than 0.25%
Turndown 6 - 1
Optional configuration for use in hazardous environments
Remote configuration via HART
Output supplied directly to DSC or PLC
MDT 467
MDT 467 - Sensor with flexible and exposed capillary
Sensor with amplifier (signal converter) in version with flexible capillary and exposed membrane. Scanning accuracy better than 1.00% of range. Power supply via 10-36 Vdc. Membrane made of 15-5 PH material and coated with DyMAX®. The length of the fixed rod can be made and adjusted to the required size.
Output signal optional
Accuracy better than 1.00%
Power supply 10 -36 V dc
6 Pin connector
R-Cal calibration
MDT 435
MDT 435 - Sensor with flexible and exposed capillary
Sensor with an amplifier (signal converter) in a version with flexible capillary and exposed membrane. Scanning accuracy better than 0.50% of the range. Power supply via 10-36 Vdc. Membrane made of 15-5 PH material and coated with DyMAX®. The length of the fixed rod can be made and adjusted to the required size.
Output signal optional
Accuracy better than 0.50%
Power supply 10 -36 V dc
6 Pin connector
R-Cal calibration
MDT 460 | 462 | TDT 463
MDT 460 - Sensor with rigid stem
MDT 462 - Sensor with flexible capillary.
TDT 463 - Sensor with flexible capillary and temperature sensor.
Sensor with integrated amplifier (signal converter). Scanning accuracy better than 1.00% of range. Power supply via 10-36 Vdc. Membrane made of 15-5 PH material and coated with DyMAX®. The length of the fixed rod can be made and adjusted to the required size.
Output signal according to configuration
Accuracy better than 1.00%
Power supply 10 -36 V dc
6 Pin connector
R-Cal calibration
MDT 420 | 422 | TDT 432
MDT 420 - Sensor with rigid stem
MDT 422 - Sensor with flexible capillary.
TDT 432 - Sensor with flexible capillary and temperature sensor.
Sensor with integrated amplifier (signal converter). Scanning accuracy better than 0.50% of range. Power supply via 10-36 Vdc. Membrane made of 15-5 PH material and coated with DyMAX®. The length of the fixed rod can be made and adjusted to the required size.
Output signal according to configuration
Accuracy better than 0.50%
Power supply 10 -36 V dc
6 Pin connector
R-Cal calibration
PT4676 (0-10Vdc)
Model PT4676 is a special variant of the pressure sensor with exposed capillary, which has an output signal of 4-20 mA. It is used wherever a conventional sensor with a fixed rod or flexible capillary cannot be installed due to lack of space.
Scanning accuracy ± 0.5%
Output signal 0 to 10 Vdc
Internal 80% calibration
Adjustable zero and sensor range
Exposed capillary