Pružanje inovativnih rješenja
S više od 6 desetljeća posvećenosti pomaganju klijentima, Dynisco pruža alate i usluge za industriju polimera omogućavajući klijentima "prozor u proces".
Današnji klijenti zahtijevaju točne informacije koje će im omogućiti validaciju i, ako je potrebno, prilagodbu njihovog procesa kako bi osigurali da proizvodi koje proizvode zadovoljavaju ili premašuju njihove specifikacije. Informacije koje Dynisco pruža omogućuju našim klijentima održavanje dosljednosti procesa bez obzira na njihovu globalnu lokaciju.
Raznovrstan portfelj Dynisco senzora i opreme za testiranje polimera pruža neke od najtočnijih informacija dostupnih na tržištu za mjerenje polimerske reologije, tlaka i temperature.
Dynisco svojim klijentima omogućuje povezivanje podataka dobivenih iz pilotnih projekata i laboratorijskih okruženja s online proizvodnjom, 24 sata dnevno. Ovi podaci omogućuju trenutnu reakciju i prilagodbu kritičnim parametrima kako bi se osiguralo da se svaka odstupanja promptno isprave radi jamčenja kvalitete i maksimiziranja proizvodnje.
Povijest Dynisco
Poznata diljem svijeta po inovativnim proizvodima za mjerenje tlaka i temperature u industriji plastike, Dynisco već 60 godina razvija inovativna visokokvalitetna rješenja za obradu ekstruzije plastike zahvaljujući stručnom timu inženjera s prosječno 15-20 godina iskustva. Senzori, kontroleri i analitički instrumenti Dynisco dokazali su se pružanjem bolje kontrole, smanjenja vremena zastoja, minimiziranja otpada te neusporedivom pouzdanošću i radnim vijekom. Naša predanost i sposobnost suradnje s vama kako bismo vam pomog li mjeriti, analizirati i opremiti sustave za upravljanje ekstruzijom koji odgovaraju vašim točnim potrebama su neusporedivi. Od inovativnih tehnologija u najkompletnijoj liniji senzora do renomirane kvalitete i performansi indikatora, kontrolera i analitičkih instrumenata.
Senzori Dynisco specifično su dizajnirani za zahtjevno okruženje industrije plastike, a Dynisco je razvio neke od najinovativnijih rješenja za mjerenje u ekstruziji plastike, brizganju i procesnoj kontroli. Proizvodimo širok raspon robusnih senzora za mjerenje tlaka u obliku mV/V, mA, VDC i HART-kompatibilnih senzora za taljenje, zahvaljujući izvrsnosti inženjeringa i iskustvu.
Analitički instrumenti Dynisco
Kvaliteta procesa započinje s upotrebom materijala. Analitički instrumenti Dynisco omogućuju procesoru provjeru specifikacija materijala i optimizaciju uvjeta procesa. Ti instrumenti uključuju uređaje za mjerenje protoka taline, kapilarni reometar i male laboratorijske sustave za miješanje i ekstruziju. Dynisco također nudi najpotpuniju i najtočniju liniju online reometara dostupnih na tržištu danas.
Dynisco nudi potpunu globalnu uslugu i tehničku podršku za svoju cjelokupnu liniju proizvoda. Duzine tehničke podrške s visokom stručnošću stacionirane su diljem svijeta kako bi pružile:
- Stručno savjetovanje
- Prilagođena rješenja
- Dijagnostiku i otklanjanje problema na licu mjesta
- Popravak i održavanje pretvarača
- Usluge instalacije
- Obuku operatera za opremu
- Popravak sustava, zamjenske dijelove, preventivno održavanje i još mnogo toga
Klijenti diljem svijeta oslanjaju se na Dynisco zbog inovacija proizvoda i naprednih sustavnih rješenja koja značajno utječu na učinkovitost njihovog proizvodnog procesa.
PT4675 (0-5 Vdc)
Model PT4675 is a special variant of the pressure sensor with exposed capillary, which has an output signal of 0-5Vdc. It is used wherever a conventional sensor with a fixed rod or flexible capillary cannot be installed due to lack of space.
Scanning accuracy ± 0.5%
Output signal 0 to 5 Vdc
Internal 80% calibration
Adjustable zero and sensor range
Exposed capillary
PT4674 (4-20 mA)
Model PT4674 is a special variant of the pressure sensor with exposed capillary, which has an output signal of 4-20 mA. It is used wherever a conventional sensor with a fixed rod or flexible capillary cannot be installed due to lack of space.
Scanning accuracy ± 0.5%
4-20mA output signal
Internal 80% calibration
Adjustable zero and sensor range
Exposed capillary
PT130 | PT140 | PT150 | PT160 Hydraulic sensors
PT 130 = 3 mV / V
PT 140 = 5 V Dc
PT 150 = 10 V Dc
PT 160 = 4 to 20 mA
This range of hydraulic sensors is designed to measure pressure in injection molding applications. It has a very good resistance to cyclic pressure, which is characteristic of these applications and provide information on the change of the hyd profile. pressure together with information on the stability of the injection system.
PT 130 = 3 mV/V
PT 140 = 5 Vdc
PT 150 = 10 Vdc
PT 160 = 4 to 20 mA
Accuracy ± 0.50%
Resistance up to 140°C
Stainless steel construction
Robust design
Internal calibration
Compact dimensions
PT4196 (Oil) 0-10 Vdc
PT4196 sensors provide a standard 0-10Vdc output signal designed to work with DCS and PLC.
The PT4196 is a ± 0.5% accuracy sensor ideal for applications in the food and pharmaceutical industries requiring easy installation, repeatability and reliability. The output signal represents 0-10. The alternative filling of the sensor in the form of oil for the food industry meets the requirements set by the USDA and the FDA.
Accuracy better than ± 0.5%
Alternative charge (oil)
0 - 1000 to 0 - 10,000 psi
0-10 Vdc output signal
Meets FDA and USDA requirements
PT4195 (Oil) 0-5 Vdc
PT4195 sensors provide a standard 0-5Vdc output signal designed to work with DCS and PLC.
It is a sensor with ± 0.5% accuracy ideal for the food or pharmaceutical industry, requiring easy installation, repeatability and reliability. It is filled with mineral oil that meets the requirements of both the USDA and the FDA.
Adjustable zero and span
The cartridge meets FDA and USDA requirements
Accuracy better than ± 0.5%
Stainless steel construction and wetted parts Coated with Dymax®
Output signal 0-5 Vdc
Internal calibration 80%
PT 4194 (Oil) 4-20mA
PT4194 sensors provide an industry standard 4-20 mA amplified signal designed to work with DCS and PLC.
It is a sensor with ± 0.5% accuracy ideal for the food or pharmaceutical industry requiring easy installation, repeatability and reliability. It is filled with mineral oil that meets the requirements of FDA 21 CFR 178.3620, 21 CFR 172.878 and 21 CFR 573.680.
Auto-Zero function
The cartridge meets FDA requirements
Scanning accuracy 0.5%
Output signal 4-20 mA
No calibration required
Ideal for medical and pharmaceutical applications
Excellent abrasion resistance
Auto-Zero
PT 418 | PT419 | TPT419 (Oil)
PT 418 - Sensor with rigid stem
PT 419 - Sensor with rigid stem and flexible stem
TPT 419 - Combined sensor with rigid stem, flexible stem and built-in temperature sensor
Model PT418 | PT419 | TPT419 uses mineral oil as a filler, which meets the requirements of the FDA and USDA and at the same time allows accurate pressure sensing in processes where it is not possible to use mercury fillings. These models are ideal for medical and food or packaging applications.
Output signal 3.33 mV/V
Accuracy better than 0.50%
Alternative filler (oil)
0-1000 to 0-10,000 psi
The filling material meets the requirements of the FDA and USDA
Power supply 10-12 Vdc
Units - PSI
8 Pin connector
Shunt calibration
PT 415D (NaK)
PT415D - Washable sensor with rigid stem and (NaK) filling.
The PT415D pressure transmitter is the ideal choice for food and medical applications that require high accuracy and easy maintenance. It is a washable sensor with insulated wiring type 1/2-14 NPT or an optional 6-pin hermetically insulated bendix connector. PT 415D contains a high temperature fill (NaK, sodium potassium) and an Inconel membrane. Meets FDA and USDA hygiene regulations and requirements.
Output signal 3.33mV/V
Accuracy better than 0.50%
Washable construction
FDA Certification - (GRAS) for food and pharmaceutical applications
Power supply 10-12 Vdc
Units - PSI
Shunt calibration
PT 410 | PT412 | TPT412 (NaK)
PT 410 - Sensor with rigid stem
PT 412 - Sensor with rigid stem and flexible stem
TPT 412 - Combined sensor with rigid stem, flexible stem and built-in temperature sensor
The PT 41x series is a sensor with ± 0.50% accuracy, which is ideal for food or medical applications. Its alternative filling (NaK), which replaces mercury.
Accuracy better than ± 0.50%
Applicability up to 538°C
NaK fill
Inconel membrane
3.33 mV/V output signal
PT 467 E
PT 467 - Sensor with flexible and exposed capillary
The PT 467 models have been designed for applications where installation space is extremely limited. The exposed part of the capillary allows a bend with a small radius of 3 mm. The specially developed design of the sensor tip facilitates the installation of the sensor in very cramped and confined spaces, where it is not possible to install a standard sensor with a fixed rod or flexible capillary.
Output signal 3.33 mV/V
Accuracy better than 1.0%
Power supply 10-12 Vdc
Units - PSI
6 Pin connector
Shunt calibration
PT 435 A
PT 435 - Sensor with flexible and exposed capillary
The PT 435 series model have been designed for applications where installation space is extremely limited. The exposed part of the capillary allows a bend with a small radius of 3 mm. The specially developed design of the sensor tip facilitates the installation of the sensor in very cramped and confined spaces, where it is not possible to install a standard sensor with a fixed rod or flexible capillary.
Output signal 3.33 mV / V
Accuracy better than 0.50%
Power supply 10-12 Vdc
Units - PSI
8 Pin connector
Shunt calibration
MDA 410 | 412 | TDA 412 (NaK)
MDA 410 - Sensor with rigid stem
MDA 412 - Sensor with rigid stem and flexible stem
TDA 412 - Combined sensor with rigid stem, flexible stem and built-in temperature sensor
Mercury-free sensors with 10-12 Vdc power supply. They meet the most stringent conditions controlled by the FDA - the Food and Drug Administration and the USDA. The membrane is made of Inconel 718. The length of the rigid rod and flexible capillary can be made and adjusted to the required size.
0 - 35 bar to 0 - 700 bar
Mercury-free sensor
Output signal 3.33 mV/V
6 Pin connector
Accuracy better than 0.50%
Use up to 540°C
Shunt calibration