PT4196 (Oil) 0-10 Vdc
The PT4196 is a ± 0.5% accuracy sensor ideal for applications in the food and pharmaceutical industries requiring easy installation, repeatability and reliability. The alternative oil fill for the food industry meets the requirements of the USDA and the FDA.
The PT4196 provides a standard 0-10 Vdc signal that is designed to work with DCS and PLC. Optional thermocouples or RTD configurations are also available to provide melt temperature and pressure in one location at a time. PT4196 is equipped with a 1 / 2-20 UNF thread for easy installation in standard mounting holes.
Melt pressure sensor in a design with a fixed stem
Melt pressure sensor in a design with a fleaxible capillary
Melt pressure sensor in combined design with temperature sensor
Melt pressure sensors series
Standard process connection of 1 / 2-20 UNF sensor with diaphragm cover.
Sensor terminal and compatible cable connector
Adjusting screws - used to adjust the zero and upper range of the sensor
Detail - Bayonet cable connector Amphenol 6-PIN
PERFORMANCE CHARACTERISTICS
|
Pressure range:
|
0 - 10 000 psi
|
|
|
Accuracy:
|
± 0,5% FSO, (Včetně linearity, opakovatelnosti a hystereze)
|
|
|
Overload capacity:
|
2 x FSO (plného rozsahu snímače)
|
|
| Repeatability: | ± 0.2% FSO (plného rozsahu snímače) | |
| Sensor diaphragm: | Dymax® povlak 15-5 PH SST | |
| Sensor connection: | 1/2"-20 UNF-2A nebo M18 x 1.5 | |
| Mounting torque: | 500 inch/lbs. maximum | |
| Sensor construction: | Sensor with rigid stem Sensor with rigid stem and flexible stem Combined sensor with rigid stem, flexible stem and built-in temperature sensor |
TEMPERATURE CHARACTERISTICS
|
Max. membrane temperature:
|
315°C
|
|
|
Zero shift (due to temperature):
|
Typical 65 psi/100°C
|
|
|
-------------------------------------------
|
------------------------------------------------------------------
|
|
| Max. sensor body temperature: | 85°C | |
| Zero shift (due to temperature) | ± 0.10% FS/°C max | |
| Displacement sensitivity (due to temperature) | ± 0.04% FS/°C max |
ELECTRICAL CHARACTERISTICS
|
Power supply:
|
16 - 36 Vdc
|
|
|
Output signal:
|
0 - 10 Vdc
|
|
|
Zero setting:
|
± 10% FSO
|
|
| Connector: | 6 Bendix PIN connector | |
| Insulation resistance: | 1000 megohms @ 50 Vdc | |
| Resistance calibration (R-Cal): | 80% of duty. range ± 0.50% of the total range |
Certification & Approval
 |
EU Declaration of Conformity for Flush Mount mV/V Output |
 |
ISO 9001:2015 |
 |
EAC - The Eurasian Conformity mark |
 |
GOST Approval |
 |
RoHS Compliance Fact Sheet |
 |
Safety Integrity Level - SIL2 |