PT4674 (4-20 mA)
The Dynisco PT4674 models offer a capillary with an exposed diameter of 0.06 "to allow bending with a radius of 1/16" for mounting in confined mounting spaces. Each model is equipped with a built-in amplifier for DCS or computer system output of 0 to 5 Vdc (PT4675), 1 to 6 Vdc (PT4675B), 0 and 10 Vdc (PT4676) or 1 to 11 Vdc (PT4676B).
Melt pressure sensor in design with exposed capillary XL
Sensor terminal and compatible cable connector
Adjusting screws - used to adjust the zero and upper range of the sensor
Detail - Bajonetový kabelový konektor Amphenol 6-PIN
PERFORMANCE CHARACTERISTICS
|
Pressure range:
|
0 - 30 000 psi
|
|
|
Accuracy:
|
± 0,5% FSO, (Včetně linearity, opakovatelnosti a hystereze)
|
|
|
Overload capacity:
|
2 X FSO nebo 35 000 psi, platí nižší hodnota
|
|
| Repeatability: | ± 0,2% FSO | |
| Sensor diaphragm: | 15 - 5 PH, DyMax™ | |
| Sensor connection: | 1/2"-20 UNF-2A | |
| Mounting torque: | 500 inch/lbs. maximum | |
| Sensor construction: | Snímač s pevnou tyčí (volitelná délka) |
TEMPERATURE CHARACTERISTICS
|
Max. membrane temperature:
|
400°C
|
|
|
Zero shift (due to temperature):
|
45 psi/100°C
|
|
|
-------------------------------------------
|
------------------------------------------------------------------
|
|
| Max. teplota těla snímače: | 121°C | |
| Zero shift (due to temperature) | ±0.05% full scale/°F | |
| Displacement sensitivity (due to temperature) | ±0.02% full scale/°F |
ELECTRICAL CHARACTERISTICS
|
Power supply:
|
11 až 36 Vdc
|
|
|
Output signal:
|
4 - 20 mA
|
|
|
Zero setting:
|
±15%
|
|
| Connector: | 6 Bendix PIN connector | |
| Insulation resistance: | 1000 megohms @ 50 Vdc | |
| Resistance calibration (R-Cal): | 80 % cel. rozsahu ± 0.50% celkového rozsahu |
Certification & Approval
 |
EU Declaration of Conformity for Flush Mount mA Output |
|
CE Approval PT46x4XL |
 |
ISO 9001:2015 |
 |
EAC - The Eurasian Conformity mark |
 |
GOST Approval |
 |
RoHS Compliance Fact Sheet |
 |
Safety Integrity Level - SIL2 |