Providing Innovative Solutions
With more than 6 decades of commitment to helping customers, Dynisco provides the tools and services for the polymer industry allowing customers a “window into the process”.
Today’s customers require accurate information that will allow them to validate and if necessary adjust their process ensuring the products they make meet or exceed their specifications. The information Dynisco provides allows our customers to keep their process consistent regardless of their global locations.
Dynisco’s diverse portfolio of sensing and polymer test equipment delivers some of the most accurate information available in the market for the measurement of polymer rheology, pressure, and temperature.
Dynisco provides our customers the ability to correlate the data derived from pilot to laboratory environments with online production, 24 hours a day. This data allows for immediate response and adjustment to critical parameters ensuring any variations are promptly corrected to guarantee quality while maximizing their output.
Dynisco History
Known worldwide for leading-edge pressure and temperature measurement and control products for the plastics extrusion industry, Dynisco has been developing innovative, high-quality solutions for plastics extrusion processing for 60 years built on the expertise of an engineering staff that averages 15-20 years experience. Dynisco sensors, controls, and analytical instruments have proven to offer better control, reduced downtime, minimum scrap, and unmatched reliability and working life. Our dedication and ability to collaborate with you to help you measure, analyze and outfit extrusion control systems that fit your exact needs are unmatched. From breakthrough technology in the industry’s most complete line of sensors to renowned quality and performance in indicators, controls, and analytical instruments.
Dynisco Sensors Designed specifically for the rugged environment of the plastic industry, Dynisco has developed some of the most innovative measurement solutions for plastic extrusion, molding and process control applications. Manufacturing a wide range of robust mV/V, mA, VDC and HART-compatible melt pressure sensors, through engineering excellence built on expertise and experience.
Dynisco Analytical Instruments Process quality begins with the material being used. Dynisco's analytical instruments allow the processor to verify material specifications and optimize process conditions. These instruments include melt flow
[Dynisco Heilbronn Germany Facility]
indexers, capillary rheometers, and small laboratory mixing extrusion systems. Dynisco also offers the most comprehensive and accurate line of online rheometers available in the market today.
Dynisco offers a full range of global service and technical support for our complete line. Dozens of highly skilled, technical support personnel are stationed internationally to provide:
- Expert consultation
- Custom design solutions
- On-site equipment diagnostics and trouble-shooting
- Transducer repair and maintenance ∙ Installation services
- Operator training for equipment ∙
- System repairs, replacement parts, preventive maintenance and more
Customers around the world have come to depend on Dynisco for product innovation and advanced system solutions that have a significant impact on their manufacturing process efficiencies.
MDA 467
MDA 467 - Sensor with flexible and exposed capillary
The sensors of this 467 series have a flexible capillary with an exposed mounting tip, which is used in an area where it is not possible to install a standard sensor with a flexible capillary and a rigid stem. Individual models have different accuracy. Model 467 has an accuracy of 1.00% of the pressure range. Power supply with 10-12 V DC and membrane made of 15-5 PH material and coated with DyMAX layer. The length of the flexible capillary can be optionally configured.
Output signal 3.33 mV/V
Accuracy better than 1.00%
Power supply 10-12 Vdc
6 Pin connector
Shunt calibration
MDA 435
MDA 435 - Sensor with flexible and exposed capillary
The sensors of this series 435 have a flexible capillary with an exposed mounting tip, which is used in an area where it is not possible to install a standard sensor with a flexible capillary and a rigid stem. Individual models have different accuracy. Model 435 has an accuracy of 0.50% of the pressure range. Power supply with 10-12 V DC and membrane made of 15-5 PH material and coated with DyMAX layer. The length of the flexible capillary can be optionally configured.
Output signal 3.33 mV/V
Accuracy better than 0.50%
Power supply 10-12 Vdc
6 Pin connector
Shunt calibration
ECHO Series
ECHO sensors are a low-cost solution for common applications.
Power supply according to configuration as well as output signal (mV / V - mA - Vdc). Membrane made of 17-4 PH SST material.
Signál dle konfigurace
6 Pin konektor
±0,50% přesnost snímání
Shunt kalibrace
Vertex Series
Vertex is more accurate than any other mercury-filled sensor and is ideal for industrial applications that require low pressure.
The pressure range for Vertex is now available from 250 - 10,000 PSI. Not only is this an overall improvement to one’s process, but it helps with customers that are focused on sustainability and zero-waste.
Optional output signal
Mercury-free sensor
Reinforced membrane
Optional HART communication
Optional connector
Accuracy better than 0.25%
Internal Shunt Calibration (R-Cal)
Temperature Controller 1498 Series
The 1498 series temperature controllers represent an economical solution for precise temperature control of the machine. Thanks to its DIN size and several output configurations, the controller is suitable for twin and single screw extruders, both for screw temperature zones and for adapter zones, together with heating / cooling for individual zones.
Snadná konfigurace
Jednoduchá obsluha
Řízení teploty
Regulaci topení
Regulace chlazení
Indikace
Univerzální vstup
Opakované procesy
Rozměr 1/8 DIN
Modbus RS485
Temperature Controller 1496 Series
The 1496 series temperature controllers represent an economical solution for precise temperature control of the machine. Thanks to its DIN size and several output configurations, the controller is suitable for twin and single screw extruders, both for screw temperature zones and for adapter zones, together with heating / cooling for individual zones.
Easy configuration
Easy operation
Temperature control
Heating regulation
Cooling control
Indication
Universal entrance
Repeated processes
Size 1/16 DIN
Modbus RS485
ATC990 Process Controller
The ATC 990 series controller is a time-tested product that has received a new design and new functions. Compared to classic features such as pressure, temperature and alarm setting options, these new models are enhanced with the ability to monitor and record parameters to a USB drive, the undeniable advantage is the large display and interactive environment when setting up the controller.
Automatic tuning
Graphic / text LCD
Alarm color LED
Easy configuration
One loop control
USB port
Modbus RS-485
Modbus TCP Ethernet
Blue Control software
PG4 Series
Dynisco's series of mechanical pressure indicators is the ideal choice for applications that require simple and maintenance-free pressure indication.
Direct, local measurement
Mechanical construction
Optional flexible capillary
The indicator head is rotatable by 300°
Pressure range 5000 or 10,000 psi
Stainless steel construction
Melt Monitor Series
The Dynisco Melt Monitor alarm series is a melt pressure sensor with an integrated digital display. Optional temperature measurement is also available.
Double five-digit display
Peak function and digital zero calibration
Accuracy ± 1.0%
Optional units
Displays pressure and optionally temperature
Optional process connection
UPR 900 Panel Indicator
The Dynisco UPR900 is a compact 1/4 DIN process indicator. The UPR900 can display your preferred production process values. Optional secondary input for displaying the temperature or pressure of the polymer melt all in one place. The secondary input can be a strain gauge to measure the differential pressure in the process. The UPR900 contains two standard assigned alarms with the option to add a third alarm.
Display of pressure, temperature
both values including the difference
Optional second input
Analog retransmission
Local or remote configuration
Graphic / text LCD
LED indication and backlight
1490 Panel Indicator
Indicator 1490 is a universal device with one or two configurable alarms, optional linear process variable retransmission, optional pressure sensor power supply, and optional Modbus communication.
Universal input
2 alarm outputs
Optional signal retransmission
Min. / max. values
Optional com. Modbus
Optional 24VDC power supply
MDA 460 | 462 | TDA 463
MDA 460 - Sensor with rigid stem
MDA 462 - Sensor with rigid stem and flexible stem
TDA 463 - Combined sensor with rigid stem, flexible stem and built-in temperature sensor
The sensors of this 46X series are specific with a 6-pin bayonet connector and an accuracy of 1.00% of the pressure range. Power supply via 10-12 V DC. Membrane made of 15-5 PH material and coated with the DyMAX layer. The length of the rigid stem and the flexible capillary can be optionally configured.
Output signal 3.33 mV/V
Accuracy better than 1.0%
Power supply 10-12 Vdc
6 Pin connector
Shunt calibration