Pressure sensors

The SPX 5 Series is an intelligent range of sensors with a 4-20 mA output signal that incorporates DynalarityTM technology. Dynisco's innovation uses an advanced logarithm that linearizes fluctuations due to process effects on the sensor.

The Dynisco SPX-4 Series is an intelligent pressure transmitter with a 4-20 mA output signal designed for use in hazardous, potentially explosive environments and is available with a variety of process and electrical connections.

TSPX-T (Series 3) is an intelligent series of sensors that includes temperature compensation and Dynisco Innovation - DynaLarity ™. The SPX-T delivers the most powerful sensors in the range. Temperature compensation is based on RTD measurements that compensate for temperature changes that reduce temperature variations and increase accuracy. There is no need to perform a temperature calibration after installing the sensor. 4-20 mA output signal.

The SPX-2 series is an intelligent pressure transmitter with a 4-20mA output signal designed for demanding applications and is available with various processes and electrical connections.

The SPX - 2 series is a robust welded construction and certified for use in the explosion hazard zone.

MDT 467 - Sensor with flexible and exposed capillary
 

Sensor with amplifier (signal converter) in version with flexible capillary and exposed membrane. Scanning accuracy better than 1.00% of range. Power supply via 10-36 Vdc. Membrane made of 15-5 PH material and coated with DyMAX®. The length of the fixed rod can be made and adjusted to the required size.

MDT 435 - Sensor with flexible and exposed capillary
 

Sensor with an amplifier (signal converter) in a version with flexible capillary and exposed membrane. Scanning accuracy better than 0.50% of the range. Power supply via 10-36 Vdc. Membrane made of 15-5 PH material and coated with DyMAX®. The length of the fixed rod can be made and adjusted to the required size.

MDT 460 - Sensor with rigid stem
MDT 462 - Sensor with flexible capillary.
TDT 463 - Sensor with flexible capillary and temperature sensor.

Sensor with integrated amplifier (signal converter). Scanning accuracy better than 1.00% of range. Power supply via 10-36 Vdc. Membrane made of 15-5 PH material and coated with DyMAX®. The length of the fixed rod can be made and adjusted to the required size.

MDT 420 - Sensor with rigid stem
MDT 422 - Sensor with flexible capillary.
TDT 432 - Sensor with flexible capillary and temperature sensor.
 

Sensor with integrated amplifier (signal converter). Scanning accuracy better than 0.50% of range. Power supply via 10-36 Vdc. Membrane made of 15-5 PH material and coated with DyMAX®. The length of the fixed rod can be made and adjusted to the required size.

Model PT4676 is a special variant of the pressure sensor with exposed capillary, which has an output signal of 4-20 mA. It is used wherever a conventional sensor with a fixed rod or flexible capillary cannot be installed due to lack of space.

Model PT4675 is a special variant of the pressure sensor with exposed capillary, which has an output signal of 0-5Vdc. It is used wherever a conventional sensor with a fixed rod or flexible capillary cannot be installed due to lack of space.

Model PT4674 is a special variant of the pressure sensor with exposed capillary, which has an output signal of 4-20 mA. It is used wherever a conventional sensor with a fixed rod or flexible capillary cannot be installed due to lack of space.

PT 130 = 3 mV / V
PT 140 = 5 V Dc
PT 150 = 10 V Dc
PT 160 = 4 to 20 mA


This range of hydraulic sensors is designed to measure pressure in injection molding applications. It has a very good resistance to cyclic pressure, which is characteristic of these applications and provide information on the change of the hyd profile. pressure together with information on the stability of the injection system.