- MDA Series
- PT Series
- MDT series
- SPX series
- Echo Series
- Vertex Series
- Industrial series
- Injection Series
- Mercury Free Series
Characteristics of the PT Series
All sensors in this series can be configured. Optional accessories offer a more resistant membrane against abrasive, aggressive materials or without mercury filling and much more.
Contact us, we will be happy to help you with the configuration.
TPT models are the same as PT, however are equipped with temperature sensors in the form of a thermocouple. J, K, T, E or PT 100 thermocouples are available.
|
Output signal |
Sensor power supply |
Pressure range |
Units |
|
Signal converter |
10 - 12 VDC |
0 - 30 000 |
PSI |
PT 467 E
PT 467 - Sensor with flexible and exposed capillary
The PT 467 models have been designed for applications where installation space is extremely limited. The exposed part of the capillary allows a bend with a small radius of 3 mm. The specially developed design of the sensor tip facilitates the installation of the sensor in very cramped and confined spaces, where it is not possible to install a standard sensor with a fixed rod or flexible capillary.
Output signal 3.33 mV/V
Accuracy better than 1.0%
Power supply 10-12 Vdc
Units - PSI
6 Pin connector
Shunt calibration
PT 435 A
PT 435 - Sensor with flexible and exposed capillary
The PT 435 series model have been designed for applications where installation space is extremely limited. The exposed part of the capillary allows a bend with a small radius of 3 mm. The specially developed design of the sensor tip facilitates the installation of the sensor in very cramped and confined spaces, where it is not possible to install a standard sensor with a fixed rod or flexible capillary.
Output signal 3.33 mV / V
Accuracy better than 0.50%
Power supply 10-12 Vdc
Units - PSI
8 Pin connector
Shunt calibration
PT 460 | 462 | TPT 463
PT 460F - Sensor with rigid stem
PT 462F - Sensor with rigid stem and flexible stem
TPT 463F - Combined sensor with rigid stem, flexible stem and built-in temperature sensor
Sensors with high accuracy ± 1.0% in optional design. Power supply via 10-12 V dc. Membrane made of 15-5 PH material and coated with DyMAX layer. The length of the fixed rod can be made and adjusted to the required size. 6-pin bayonet connector.
Výstupní signál 3,33 mV/V
Přesnost lepší než 1,0%
Napájení 10-12 Vdc
Jednotky - PSI
6 Pin konektor
Shunt kalibrace
PT 420 | 422 | TPT 432
PT 420A - Sensor with rigid stem
PT 422A - Sensor with rigid stem and flexible stem
TPT 432A - Combined sensor with rigid stem, flexible stem and built-in temperature sensorThe
PT420A Series transducer is a ±0,50% sensor ideal for melt pressure applications requiring high accuracy, simple installation, repeatability and reliability.
Output: 3.33 mV/V
Accuracy better than 0,50%
Units - PSI
Power supply 10-12 Vdc
8 Pin connector
Shunt calibration