Model 809 Hammer Union Pressure Transmitter
809 is the version of 09 series with no signal conditioner. A variety of sensor materials and electrical connections are available.
PERFORMANCE
|
Full Scale Pressure Ranges:
|
0-5K, 10K, 15K, 20K PSIG (0-345, 689, 1034, 1379 bar)
|
|
|
Combined Accuracy (BFSL):
|
(Non-Linearity, Hysteresis & Repeatability) ≤± 0.25% FSO
|
|
|
Full Scale Output (FSO):
|
30 mVC ±1% FSO at 10 V excitation
|
|
| Zero Balance: | 0 Vdc ±1% FSO | |
| Compensated Temperature Range: | -20°F to 185°F (-29°C to 85°C) | |
| Operating Temperature Range: | -40°F to 250°F (-40°C to 121°C) | |
| Storage Temperature Range: | -67°F to 302°F (-55°C to 150°C) | |
| Long Term Stability (%FSO): | ≤±0.25% FSO per 6 months | |
| Thermal Effect on Zero: | ≤±1% FSO per 100°F (37°C) | |
| Thermal Effect on Span: | ≤±1% FSO per 100°F (37°C) |
ELECTRICAL
|
Output Signal:
|
3 mV/Volt at 70°F (21°C)
|
|
|
Supply Voltage:
|
10 Vdc nominal (15 Vdc max)
|
|
|
Power Supply Regulation:
|
Output varies with input (calibrated at 10 Vdc)
|
|
| Load Impedance: | 350,000 Ohms minimum for <0.1% FSO attenuation | |
| Circuit Protection: | Varistor protected across the input leads for surges above 34V to 20a. @ 0.02 milliseconds | |
| Insulation Resistance: | ≥100 MegOhms to case ground | |
| Response Time: | ≤2.5 mSec to reach 90% of FSO | |
| Range Calibration Signal: | 100% of FSPR | |
| Calibration Power: | Short pins E & F | |
| Calibration Signal Accuracy: | ≤±0.2% FSO. The exact signal to pressure correlation is provided with each unit | |
| Bridge Resistance: | 10K Ohms nominal | |
| Standard Electrical Connection: | Mates with Bendix P/N PT06E-10-6S or equivalent | |
| PIN OUTS: | PIN A +Power PIN B -Power PIN C +Signal PIN D -Signal PIN E Calibration PIN F Calibration Some models are provided with customer specified wiring. Consult Viatran for exact wiring connections. |
MECHANICAL
|
Standard Pressure Port:
|
Male hammer union 2 inch #1502
|
|
|
Pressure Cavity Volume:
|
0.4 cubic inches
|
|
| Shock Sensitivity: | 100 G’s | |
| Proof Pressure: | 1.67 times the FS or 22.5K PSI (1550 bar) for union #1502 30K PSI (2068 bar) for union #2002 whichever is less |
|
| Burst Pressure: |
≥3 times FSPR, limited by union #1502: 22.5K PSI (1550 bar) |
MATERIALS OF CONSTRUCTION
|
Wetted Materials: |
Inconel X-750, heat treated per MR0175-2000
|
|
|
Enclosure Material: |
304 stainless steel
|
|
|
Identification:
|
Laser etched onto body
|
|
| Enclosure Rating: | NEMA 4X | |
| Weight: | 5.5 lbs nominal (2.4 kg) |
OPTIONS
|
DH
|
Special range
|
|
|
EA
|
Special calibration run
|
|
|
NJ |
CE label
|
|
|
TP
|
Low cavity volume sensor design | |
|
ZQ
|
CG379-C-145-2P (Glenair) electrical connector | |
|
ZT
|
REC-M-10TP-N-04-16 (Jupiter) connector |