Submersible level transmitters

Model 596 Detachable Level Transmitter

Model 596 Detachable Level Transmitter

When you need to replace your wastewater level transmitter, you don’t have time to wait. Downtime is not an option. With Viatran’s new RapidShip program, the Model 596 Detachable Level Transmitter is available in as little as one 1 to 2 days, and in some cases can be shipped overnight.
The RapidShip program allows you to reduce your inventory costs, minimize your supply chain management effort, eradicate unexpected delays and/or line down situations resulting from peaks in demand.
The Detachable Level Transmitter allows for a quick swap of the sensor head without having to remove your entire cable run. Model 596 is a rugged transmitter that is ideal for higher viscosity media and is resistant to a wide variety of materials. Its semi-flush ceramic sensing face resists clogging and is easily cleaned, allowing it to be used without a cage.

This model can operate in pressure ranges from 0-32 in. w.c. to 0-335 ft. w.c. (or equivilent in meters or PSI )and an operating temperature range of -13° to 185° F (-25° to 85° C). Viatran also stocks six of the most popular polyurethane cable sizes in lengths up to 150 feet (46 meters). When ordering, please specify the range (depth) and cable length needed.

PERFORMANCE

  Pressure Ranges 0-32" W.C. to 0-335 Feet W.C. or equivalent in Meters or PSI
Accuracy [Combined Non-Linearity (BFSL), Hysteresis & Repeatability] ≤ +/-0.1% FSO [Combined Non-Linearity (BFSL), Hysteresis & Repeatability]
Compensated Temperature Range -4° to 176° F (-20 to 80° C)
  Operating Temperature Range -13° to 185° F (-25 to 85° C) Note: Medium must not freeze near sensor
Storage Temperature Range -13° to 185° F (-25 to 85° C)
Long Term Stability (%FSO) ≤ +/- 0.1% FSO / year Note: At reference condition
Thermal Effect on Zero ≤ +/- 0.16% FSO per 100° F
Thermal Effect on Span ≤ +/- 0.16% FSO per 100° F

ELECTRICAL

 
Output Signal
4-20 mA
 
Supply Voltage
12-36 Vdc
 
Power Supply Regulation
< +/- .005% FSO per volt
Circuit Protection Reverse polarity protected, CE marked
RFI / EMI CE EMC compliant as per IEC EN 61326
Voltage Spike Protection Withstand 1000 volt spike per EN 61000
Response Time < 380 mSec

MATERIALS OF CONSTRUCTION

Housing
316L Stainless Steel
 
Sensor Diaphragm
Ceramic Al2O3 96%
O-ring Seals
FKM (Standard) or EPDM (Optional)
Removable Protective Cap POM (Polyoxymethylene)

MECHANICAL

 
Pressure Connection
Removable Protective POM cap
 
Ingress Protection
IP 68
 
Overpressure Limit
5x Minimum (≥ 167 Ft. range = 3.5x)
Weight 1.4 lbs. (without cable)

OPTIONS

 
EA
Special Calibration Run
 
PW
Calibrate Transmitter with Meter / Display
  ZB SharkCage Removable Protective Cage
NSR 1/2" NPT Conduit Adapter