DYNISCO

PT311JA Pressure sensor

PT311JA Pressure sensor

Dynisco's PT311JA flush diaphragm pressure transducer is designed for applications requiring a zero volume pressure port. The flush diaphragm improves frequency response and has excellent cleanability. The PT311JA has a full scale output of 3mV/V and offers reliable and accurate pressure measurement of gases, viscous liquids and slurries.

All sensors in this series can be configured according to your needs. Contact us, we will be happy to help you.

PT 311JA Pressure sensor

PT 311JA Pressure sensor

Inquiry system 

Configure your own product according to your requirements and needs. If you are unsure of the configuration, provide us in the notes the necessary information about the existing sensor or product, even a competitor. We will be happy to help you find an alternative Dynisco product. If your request is urgent, let us know. We will do our best to help you resolve this situation to your satisfaction as quickly as possible. If we have all the information, we are able to offer a model with minor differences, which is in stock and you can have another product available the next day.

If you need more information do not hesitate to contact us.

Dynisco configuration code:

Vaše osobní údaje budou zpracovány podle Podmínek zpracování osobních údajů.

PT311JA Flush Mounted Pressure Sensors

Reliable And Accurate Pressure Measurement


Dynisco's PT311JA flush diaphragm pressure transducer is designed for applications requiring a zero volume pressure port. The flush diaphragm improves frequency response and has excellent cleanability. The PT311JA has a full scale output of 3mV/V and offers reliable and accurate pressure measurement of gases, viscous liquids and slurries.

Performance Characteristics 

 
Pressure Range (psi): 0 - 10,000 PSI
Accuracy: ±0.5% full scale including linearity, hysteresis and repeatability

  

Electrical Characteristics

 
Full Scale Output: 3 mV/V minimum
Excitation: 10 Vdc recommended, 12 Vdc maximum
Insulation Resistance: 1,000 megohms @ 50 Vdc
Bridge Resistance: 350 Ohms nominal
Internal Shunt Calibration: 80% full scale ±1.0%

Temperature Characteristics

 

Operating Range: 65° to +250°F (-54°C to +120°C)
Compensated Range: 0° to 150°F (-18°C to +66°C)
Temperature Effect On Zero: ±0.01% full scale/°F (±0.018% full scale/°C)
Temperature Effect On Span: ±0.02% full scale/°F (±0.036% full scale/°C)

Mechanical Characteristics

 

Safe Overpressure: 2 x rated pressure
Burst Pressure: 4 x rated pressure
Wetted Material: 17 - 4 PH stainless steel
Cover Material: 303, 304 stainless steel
Pressure Port Seal: Transducer supplied with DYNA-SEAL™ (P/N 633014)
Weight: Approximately 5 ounces

Ordering Guide for PT311JA Pressure Sensors

   

 

PT311JA - Dimensions  

All dimensions are inches (mm) unless otherwise specified.

Torque wrench Wera 20 - 100 Nm

Torque wrench Wera 075611 Click-Torque B 2 with switch ratchet 3/8 "(20 - 100 Nm)

Wera Click-Torque torque wrenches are supplied as switch ratchets (with connection dimensions 1/4 ", 3/8", 1/2 "and 3/4") or with clamping for socket tools (9x12 mm, 14x18 mm) for tightening torques from 2.5 Nm up to 1,000 Nm.
All Wera Click-Torque torque wrenches manufactured in accordance with DIN EN ISO 6789 are supplied with a declaration of conformity.

1490 Panel Indicator

Indicator 1490 is a universal device with one or two configurable alarms, optional linear process variable retransmission, optional pressure sensor power supply, and optional Modbus communication.

1480 Panel Indicator

1480 is a universal pressure or temperature indicator with one or double configurable alarm as well as optional linear retransmission of the displayed process. Ideal for use in extrusion applications.

UPR 900 Panel Indicator

The Dynisco UPR900 is a compact 1/4 DIN process indicator. The UPR900 can display your preferred production process values. Optional secondary input for displaying the temperature or pressure of the polymer melt all in one place. The secondary input can be a strain gauge to measure the differential pressure in the process. The UPR900 contains two standard assigned alarms with the option to add a third alarm.

ATC990 Process Controller

The ATC 990 series controller is a time-tested product that has received a new design and new functions. Compared to classic features such as pressure, temperature and alarm setting options, these new models are enhanced with the ability to monitor and record parameters to a USB drive, the undeniable advantage is the large display and interactive environment when setting up the controller.

Transducer Mounting Hole Cleaning Tool Kit

Installation of transducers into improperly cleaned or sized holes is one of the major causes of damage to these instruments. With this kit, the .312" tip diameter hole, the 45 degree seating surface, and the .451" hole can be cleaned. The kit includes a gauging plug which is used to verify that the hole has been correctly machined and cleaned. M10 and M18 cleaning kits also available.
 

Transducer Mounting Hole Machining Tool Kit

The Dynisco Transducer Mounting Hole Machining Tool Kit contains all of the necessary drills and taps to prepare a standard 1/2 - 20 UNF transducer mounting hole and the 45 degree seat. All tools included in this kit are made of premium grade, high strength tool steel. Care should be taken in the use of proper speeds and feeds, lubricants, and a method to assure continual alignment of each progressing tool. M10 and M18 kits are also available.

PPS1210 calibration pump

The PPS1210 pressure calibration pump with heated pressure port enables fast and accurate inspection of melt pressure sensors directly in the laboratory or directly in the factory. Thanks to its compact dimensions, it is easily portable.

Six-core, shielded cable with threaded Bendix 6pin connector

These cables are used to connect Dynisco pressure sensors to a 6-pin connector. The cables provide the electrical connection between the sensors and the indicators or controllers. The kits consist of a Bendix bayonet connector and a six-core shielded cable.

Certifikati in odobritve

Pregled razpoložljivih certifikatov in odobritev: Obiščite to povezavo, ki vas bo odpeljala na stran s celovitim seznamom trenutnih certifikatov in odobritev za naše izdelke. Tu lahko preverite, ali naša ponudba ustreza najvišjim standardom kakovosti in varnosti. Več informacij


E-učenje

Odkrijte svet naše spletne strani za e-učenje in spoznajte, kako poenostaviti vašo vsakodnevno uporabo naših izdelkov. Naše praktične in celovite tečaje ter informativne materiale vam bodo pokazali, kako poenostaviti in izboljšati uporabo naših tehnologij, razkriti nove informacije in tehnike ter optimizirati delovne procese. S temi viri boste dosegli večjo učinkovitost, prihranili čas in izboljšali rezultate vašega dela. Več informacij


Instrukcijski video posnetki

Naši instrukcijski video posnetki ponujajo interaktiven način učenja o naših izdelkih. Združujejo vizualno in zvočno vsebino ter ponujajo praktične rešitve za pogoste težave, s čimer prihranite čas in se izognete morebitnim težavam. Če naletite na težavo, vam naši video priročniki ponujajo podrobna navodila in praktične nasvete za njeno reševanje. Na voljo so kadarkoli in predstavljajo priročen vir informacij, ki dopolnjuje našo tehnično podporo. Več informacij


Ustrezeni članki

Naši tehnični članki nudijo praktičen način za spoznavanje več o naših izdelkih in njihovi uporabi. Zagotavljajo podrobne informacije in praktične nasvete o reševanju pogostih težav, s čimer prihranite čas in se izognete morebitnim težavam. Če še vedno naletite na težavo, naši tehnični članki ponujajo posebna navodila za njeno reševanje. Na voljo so kadarkoli in predstavljajo priročen vir informacij, ki dopolnjuje našo tehnično podporo. Več informacij