Differential pressure transmitters

Model 276 Pressure Transmitter

Model 276 Pressure Transmitter

Viatran’s proprietary technology provides an accuracy of better than ±0.15% FSO. Wetted surfaces are manufactured from 316 stainless steel allowing for better corrosion resistance. Viatran designed the “76” Series to be easily accessible in confined spaces. The X76 is supported by the process connection or by an adaptable L-shaped mounting bracket.

A quick disconnect electrical connection allows for easy setup and removal. Topmounted zero and span adjustments and an internal calibration circuit simplify field setup and provide a quick two-point calibration check.

With over twenty different electrical connections and pressure ports, as well as optional improved temperature performance and modified outputs, the 276 exceeds the most demanding application requirements.


Full Scale Pressure Ranges 0-5, 10, 20, 50, 100, 300, 750" W.C.D.
0-15, 50, 100 PSID (0-1, 3.4, 6.8 bar
  Nonlinearity (Best Fit Straight Line) ≤±0.15% FSO
  Hysteresis ≤±0.10% FSO
Repeatability ≤ ±0.10% FSO
  Resolution Infinite
  Long Term Stability ≤±0.2% FSO per 6 months
  Pressure Connection Effect Zero Balance ≤±1% FSO
  Compensated Temperature Range 0°F to 200°F (-17°C to 85°C)
  Operating Temperature Range -40° F to +185° F (-40°C to 121°C)
  Storage Temperature Limits -40°F to +250°F (-40°C to 121°C)
Temperature Effect on Zero ≤± 2.0% FSO per 100° F
Temperature Effect on Span ≤± 2.0% FSO per 100° F


Supply Voltage:
10 to 45 Vdc
Power Supply Regulation
≤±0.10% FSO change over supply voltage range
Output Signal
0 to 5 Vdc
  Zero Adjustment ± 10 % FSO min. / ±20% FSO max.
  Span Adjustment ± 10% FSO min. / ±20% FSO max.
  Calibration Signal 80% FSO
  Calibration Signal Accuracy ≤±0.2% FSO

Circuit Protection

Reverse polarity protected
  Insulation Resistance 200 MegOhms
  Electrical Connection Bendix PT02E-10-6P, mates PT06E-10-6S (SR)
  Pin Outs Pin A + Power
Pin B - Power
Pin C + Signal
Pin D - Signal
Pin E Calibrate
Pin F Calibrat


Wetted Materials
316 Stainless steel
Powder coated cast alloy
Laser etched onto body


Pressure Connection:
1/4" - 18 NPT female
Line Pressure
500 PSI (34 bar)
Proof Pressure
500 PSI (34 bar)
  Burst Pressure 1000 PSI (68.9 bar)
  Pressure Cavity Volume Approximately 2 mL each side
Volume Displacement at FSPR Approximately 0.1 mL
Fill Fluid Approximately 1.5 mL
Mounting May be supported by process piping or by optional mounting bracket
Mounting Position Effect <1" WC, any direction
Weight 2 lbs


B ( )
Alternate electrical connector
  Y ( ) Alternate pressure ports
  DG Improved temperature compensation to ±1.0% FSO per 100°F
  DH Special ranging
  DK Special shunt calibration setting
  DM Modified full scale output
  EA Special calibration run
  NH Customer specified identification
  PW 1/8 DIN digital indicator
  Note: Application of some available options may affect standard performance. Consult your Viatran representative for details.