Flush mount pressure transmitters

Model 386 Pressure Transmitter

Model 386 Pressure Transmitter

The Model 386 Flush Tip – Zero Cavity design offers an Isolated sensor assembly that virtually eliminates installation torque effect and is able to withstand pressure spikes up to 1.5x proof pressure and 5x burst pressure (or 30,000 PSI, whichever is less).



Full Scale Pressure Ranges:
0-100, 150, 160, 200, 300, 500, 750, 1000, 1500, 2000, 3000, 5000, 7500, 10,000 PSIG / PSIS
Static Error Band
≤±0.5% FSO (Includes BFSL, Hysteresis and Repeatability by RSS)
  Compensated Temperature Range 70°F to 170°F (21°C to 77°C)
  Operating Temperature Range

-40°F to 185°F (-40°C to 85°C)

  Storage Temperature Limits -40°F to 250°F (-40°C to 120°C)
Temperature Effect on Zero ≤±2% FSO per 100°F Typical
  Temperature Effect on Span ≤±2% FSO per 100°F Typical
Long Term Stability (%FSO) ≤±0.25% FSO per 6 months


Supply Voltage:
8-28 Vdc
  Power Supply Regulation <±.05% FSO per volt
  Output Signal

4-20 mA

Load Impedance 926 Ohms maximum at 28 volts DC
  Circuit Protection Reverse polarity protected, CE marked
RFI / EMI CE EMC compliant as per IEC EN 61326-1 and EN 61326-2-3 Annex BB

Voltage Spike

Withstand 1000 volt spike per EN 61000-4-5
Insulation Resistance <5 nS
Response Time <2 mSec for 10-90% of final value
Electrical Connection Bendix PT02E-10-6P, mates PT06E-10-6S (SR) (BH option)

Wire Color Code

Pin A + Power / Signal
Pin B - Power / Signal
Pin C No connection
Pin D No connection
Pin E AC Ground
Pin F No connection
Shell Case Groun



Pressure Connection
1/2" NPT (M)
Proof Pressure
  Burst Pressure 5X (or 30,000 PSI, whichever is less)
  Zero Effect from Installation

<±0.10% at 25 to 50 ft lbs




Wetted Materials:

15-5 PH and 304L Stainless Steel (Inconel 718 optional)
  Weight: 8 oz. nominal