Model 14B Pressure Transmitter
LEGACY APPLICATIONS SUPPORT
Viatran's 14B pressure transmitter is specifically designed for early generation Data Acquisition Systems which used external amplifiers. The 14B uses a 350 ohm bridge, which is compatible with legacy amplifiers to make instrumentation switch out fast and easy.
For assistance with selecting the best 14B Model for your application, please contact our Application Engineers.
TYPICAL APPLICATIONS
Engine test stands
Turbine-Rocket testing
Diesel-internal combustion
Emission testing
Production test stands
Transmission testing
Off road vehicles
Compressors and pumps
Stamping Presses
Rolling Mills
Die Casting
Hydraulic usage
PERFORMANCE
|
Full Scale Pressure Ranges:
|
0-100 thru 15,000 PSIG (PSIS FOR ≥ 1500 PSI) (7 thru 1000 bar)
|
|
|
Combined Accuracy (Non-Linearity, HYsteresis, Repeatability)
|
≤±0.3% FSO
|
|
| Full Scale Output (FSO) | 3.0 mV/V dc at 70°F (21°C) ±1% FSO | |
| Resolution | Infinite | |
| Zero and Span Balance | ± 1% FSO | |
|
Long Term Stability |
≤±0.3% FSO per 6 months | |
| Compensated Temperature Range | 70°F to 170°F (21°C to 77°C) | |
| Operating Temperature Range | Process (Media) (-40 °C to 121 °C) Ambient (-40 °C to 85 °C) |
|
| Storage Temperature Limits | -40°F to 250°F (-40°C to 121°C) | |
| Temperature Effect on Zero | ≤±2.0% FSO per 100°F | |
| Temperature Effect on Span | ≤±2.0% FSO per 100°F | |
| * For PSIV and Compound Range units | Temperature Effect on Zero ≤±3.0% per 100°F Compensated Temperature Range 32°F to 170°F (0°C to 77°C) Output Signal 5 mv/V |
ELECTRICAL
|
Supply Voltage:
|
10 V dc nominal, 15 V max
|
|
| Power Supply Regulation | ≤±0.01% FSO per volt change over the supply voltage range | |
| Output Signal |
3.0 mV/V dc standard |
|
| Circuit Protection | Reverse polarity protected. Output may be short circuited indefinitely. Over voltage protection to 1000 volts according to EN61000-4- |
|
| Insulation Resistance | <5 nSec to case ground | |
|
Response Time |
<2 mSec to reach 90% of full scale | |
| RFI/EMI Suppression | CE EMC compliant per IEC EN 61326. CE marked. | |
| Electrical Connection | Bendix PT02E-10-6P, mates PT06E-10-6S (SR) | |
|
Wire Color Code |
Pin A Power Pin B -Power Pin C +Signal Pin D -Signal Pin E No connection Pin F No connection |
MECHANICAL
|
Pressure Connection
|
1/4” - 18 NPT female
|
|
|
Proof Pressure
|
1.5 times range or 20,000 PSI (1400 bar) max
|
|
| Burst Pressure | 3 times range or 35,000 PSI (2400 bar) max | |
| Pressure Cavity Volume |
4.5 ml |
|
| Mounting | May be supported by process pipin |
MATERIALS OF CONSTRUCTION
|
Wetted Materials: |
15-5 PH Stainless steel
|
|
|
Housing
|
304L Stainless steel
|
|
|
Identification:
|
Laser etched onto body
|
|
| Weight: | 10 oz (283 g) |