PT 467 XL
The PT467 XL series of pressure transmitters are the ideal choice for applications with high accuracy and minimal mounting space. The PT467 XL models have an accuracy of ± 0.5% of range and an exposed capillary with a diameter of 1.5 mm, which allows bending in a radius of 1/16 inch. The sensors are supplied with a Dymax® membrane, which ensures an increase in wear resistance and thus a longer service life. Sensors marked XL have a protector (flexible capillary) up to the tip of the sensor.
The sensors come with a 6-pin Bendix connector, which is used for easy connection. These models are also an ideal option for all polymer melt injection applications.
PT 467 XL - Melt pressure sensor in design with exposed capillary XL
Adjusting screws - used to adjust the zero and upper range of the sensor
Koncovka snímače a kompatibilní kabelový konektor
PERFORMANCE CHARACTERISTICS
|
Sensor power supply:
|
10Vdc recommended, 12Vdc max
|
|
|
Output signal:
|
3.33 mV/V ±2.0%
|
|
|
Accuracy*:
|
± 0,5% FSO
|
|
| Repeatability: | ± 0.2% FSO | |
|
Overload pressure: |
2 x plný rozsah nebo 35 000 psi (platí nižší hodnota) | |
| Pressure ranges (psi): |
0-500 0-750 0-1,000 0-1,500 0-3,000 |
|
| Pressure units: | PSI | |
| Bridge resistance: | Vstup: minimálně 345 Ohmů; Výstup: 350 Ohmů ±10% | |
| Insulation resistance: | 1000 MΩ @50VDC | |
| Internal calibration of R-Cal: | 1,000 megohms při 50 Vdc | |
| Material in contact with the melt: | 15-5 PH nerezová ocel, potažená vrstvou Dymax® |
TEMPERATURE AND MECHANICAL CHARACTERISTICS
|
Sensor technology:
|
4-ramenný tenzometrický Wheatstoneův můstek
|
|
|
Maximum membrane temperature:
|
400°C
|
|
|
Zero shift (due to temperature):
|
Standardně 45 psi/100°C
|
|
| Maximum temperature of the electronics housing: | 121°C | |
|
Zero shift |
± 0.10% FS/ºC max | |
|
Range offset |
maximální (± 0,10% plného rozsahu / ° C) | |
| Mounting torque: | 500 in/lbs, max |
Certification Approval
 |
EU Declaration of Conformity for Flush Mount mV/V Output |
 |
ISO 9001:2015 |
 |
EAC - The Eurasian Conformity mark |
 |
GOST Approval |
 |
RoHS Compliance Fact Sheet |
 |
Safety Integrity Level - SIL2 |