PT130 | PT140 | PT150 | PT160 Hydraulic sensors
PT130, PT140, PT150 and PT160 are designed to measure hydraulic pressure on injection molding machines. The PT series resists cyclic pressure and provides excellent performance even in demanding conditions. Changes in the hydraulic pressure profile indicate irregularities during the injection phases together with the performance of the forming operation and provide information on the stability of the overall system.
PERFORMANCE CHARACTERISTICS
|
Pressure range:
|
0 - 10 000 psi
|
|
|
Accuracy:
|
± 0.5% FSO, (Including linearity, repeatability and hysteresis)
|
|
|
Overload capacity::
|
2 X FSO or 35,000 psi, lower value applies
|
|
| Repeatability: | ± 0,2% FSO | |
| Sensor diaphragm: | 17 - 4 PH, 15 - 5 PH stainless steel |
|
| Sensor connection: | 1/2"-20 UNF-2A | |
| Mounting torque: | 500 inch/lbs. maximum | |
| Sensor construction: |
TEMPERATURE CHARACTERISTICS
|
Max. membrane temperature:
|
400°C
|
|
|
Zero shift (due to temperature):
|
45 psi/100°C
|
|
|
-------------------------------------------
|
------------------------------------------------------------------
|
|
| Max. sensor body temperature: | 121°C | |
|
Zero shift (due to temperature) |
PT 130: ±0.009% FSO/°C typical ±0.01%/±0.018% |
|
| Displacement sensitivity (due to temperature) | ±0.036% FSO/°C |
ELECTRICAL CHARACTERISTICS
|
Output signal:
|
Napájení:
|
|
| 3 mV / V | 10 Vdc recommended, maximum 15 Vdc | |
| 0 to 5 Vdc (4-wire) | 11 to 32 Vdc, ± 12 to ± 16 Vdc | |
| 1 to 6 Vdc (3-wire) | 11 to 32 Vdc | |
| 0 to 10 Vdc (4-wire) | 16 to 32 Vdc, ± 14 to ± 16 Vdc | |
| 1 to 11 Vdc (3-wire) | 16 to 32 Vdc | |
| 4 to 20 mA (2-wire) | 14 to 36 Vdc | |
|
Zero setting:
|
±15%
|
|
| Connector: | 6 Bendix PIN connector | |
| Insulation resistance: | 1000 megohms @ 50 Vdc | |
| Resistance calibration (R-Cal): | 80% of duty. range ± 0.50% of the total range |
Certification & Approval
 |
EU Declaration of Conformity |
 |
ISO 9001:2015 |
 |
EAC - The Eurasian Conformity mark |
 |
GOST Approval |
 |
RoHS Compliance Fact Sheet |
 |
Safety Integrity Level - SIL2 |