Charakterystyka serii modeli SPX
Wszystkie czujniki z tego zakresu modeli można konfigurować. Opcjonalne akcesoria oferują bardziej odporną membranę na materiały ścierne, agresywne lub bezrtęciowe i wiele więcej.
Skontaktuj się z nami, chętnie pomożemy w konfiguracji.
Czujniki do środowisk zagrożonych wybuchem. Certyfikacja ATEX. Funkcja komunikacji Smart HART™.
Możliwość montażu za pomocą kołnierza
Sygnał wyjściowy |
Zasilanie czujnika |
Zakres ciśnienia |
Jednostki |
4 - 20 mA |
10 - 36 VDC Standard |
0 - 2 000 |
Optional |
SPX3290
The SPX-T (3-Series) is a smart 4-20mA pressure transmitter that includes Temperature Compensation and DynaLarity™, a Dynisco innovation. The SPX-T delivers the best spec performance in the line. Temperature Compensation is based on an RTD measurement that compensates for temperature variations which reduces temperature-related drift and increases accuracy. No need to re-zero for temperature changes after installation. DynaLarity uses an advanced algorithm that will linearize offsets due to process effects on the sensor.
4-20mA output
±0.15% accuracy
80% drift reduction
Temperature output
Pressure range selection
6:1 Turndown
Hazardous locations
HART configuration
DSC/PLC output
PL'c' (Relay)
Extra approvals
SPX3291
The SPX-T (3-Series) is a smart 4-20mA pressure transmitter that includes Temperature Compensation and DynaLarity™, a Dynisco innovation. The SPX-T delivers the best spec performance in the line. Temperature Compensation is based on an RTD measurement that compensates for temperature variations which reduces temperature-related drift and increases accuracy. No need to re-zero for temperature changes after installation. DynaLarity uses an advanced algorithm that will linearize offsets due to process effects on the sensor.
4-20mA output
±0.15% accuracy
80% drift reduction
Temperature output
Pressure range selection
6:1 Turndown
Hazardous locations
HART configuration
DSC/PLC output
PL'c' (Relay)
Extra approvals
SPX3390
The SPX-T (3-Series) is a smart 4-20mA pressure transmitter that includes Temperature Compensation and DynaLarity™, a Dynisco innovation. The SPX-T delivers the best spec performance in the line. Temperature Compensation is based on an RTD measurement that compensates for temperature variations which reduces temperature-related drift and increases accuracy. No need to re-zero for temperature changes after installation. DynaLarity uses an advanced algorithm that will linearize offsets due to process effects on the sensor.
4-20mA output
±0.15% accuracy
80% drift reduction
Temperature output
Pressure range selection
6:1 Turndown
Hazardous locations
HART configuration
DSC/PLC output
PL'c' (Relay)
Extra approvals
SPX3391
The SPX-T (3-Series) is a smart 4-20mA pressure transmitter that includes Temperature Compensation and DynaLarity™, a Dynisco innovation. The SPX-T delivers the best spec performance in the line. Temperature Compensation is based on an RTD measurement that compensates for temperature variations which reduces temperature-related drift and increases accuracy. No need to re-zero for temperature changes after installation. DynaLarity uses an advanced algorithm that will linearize offsets due to process effects on the sensor.
4-20mA output
±0.15% accuracy
80% drift reduction
Temperature output
Pressure range selection
6:1 Turndown
Hazardous locations
HART configuration
DSC/PLC output
PL'c' (Relay)
Extra approvals
SPX4222 & SPX4622
The Dynisco SPX 4-Series is a smart 4-20mA pressure transmitter designed for use in hazardous locations and are available with a variety of different process and electrical connections These amplified transmitters eliminate the need for external signal conditioning. All models can interface directly with distributed control systems, PLC's, computers, and similar high level control devices. Optional thermocouple or RTD configurations are available to provide melt temperature.
4-20mA Output
0.25% Accuracy
Pressure Selection
6:1 Turndown
Hazardous Configurations
HART Remote
Precise Measurements
DSC/PLC Output
PL'c' Relay
Extra Approvals
SPX4352 & SPX4672
The Dynisco SPX 4-Series is a smart 4-20mA pressure transmitter designed for use in hazardous locations and are available with a variety of different process and electrical connections These amplified transmitters eliminate the need for external signal conditioning. All models can interface directly with distributed control systems, PLC's, computers, and similar high level control devices. Optional thermocouple or RTD configurations are available to provide melt temperature.
4-20mA Output
0.25% Accuracy
Pressure Selection
6:1 Turndown
Hazardous Configurations
HART Remote
Precise Measurements
DSC/PLC Output
PL'c' Relay
Extra Approvals
SPX4232
The Dynisco SPX 4-Series is a smart 4-20mA pressure transmitter designed for use in hazardous locations and are available with a variety of different process and electrical connections These amplified transmitters eliminate the need for external signal conditioning. All models can interface directly with distributed control systems, PLC's, computers, and similar high level control devices. Optional thermocouple or RTD configurations are available to provide melt temperature.
4-20mA Output
0.25% Accuracy
Pressure Selection
6:1 Turndown
Hazardous Configurations
HART Remote
Precise Measurements
DSC/PLC Output
PL'c' Relay
Extra Approvals
SPX5342
The Dynisco SPX 5-Series is a smart 4-20mA pressure transmitter that includes DynalarirtyTM , a Dynisco innovation that uses an advanced algorithm that will linearize offsets due to process effects on the sensor. The SPX 5-Series is an all welded construction designed for use in hazardous locations and is available with a variety of process and electrical connections. These amplified transmitters eliminate the need for external signal conditioning. All models can interface directly with distributed control systems, PLC's, computers, and similar high level control devices. Optional thermocouple or RTD configurations are available to provide melt temperature
20mA Output
Dynalarity ±0.2%
Pressure Selection
3:1 Turndown
Hazardous Use
HART Remote
Precise Measurements
DSC/PLC Output
PL'c' Relay
Extra Approvals
SPX5343
The Dynisco SPX 5-Series is a smart 4-20mA pressure transmitter that includes DynalarirtyTM , a Dynisco innovation that uses an advanced algorithm that will linearize offsets due to process effects on the sensor. The SPX 5-Series is an all welded construction designed for use in hazardous locations and is available with a variety of process and electrical connections. These amplified transmitters eliminate the need for external signal conditioning. All models can interface directly with distributed control systems, PLC's, computers, and similar high level control devices. Optional thermocouple or RTD configurations are available to provide melt temperature
20mA Output
Dynalarity ±0.2%
Pressure Selection
3:1 Turndown
Hazardous Use
HART Remote
Precise Measurements
DSC/PLC Output
PL'c' Relay
Extra Approvals
SPX5344
The Dynisco SPX 5-Series is a smart 4-20mA pressure transmitter that includes DynalarirtyTM , a Dynisco innovation that uses an advanced algorithm that will linearize offsets due to process effects on the sensor. The SPX 5-Series is an all welded construction designed for use in hazardous locations and is available with a variety of process and electrical connections. These amplified transmitters eliminate the need for external signal conditioning. All models can interface directly with distributed control systems, PLC's, computers, and similar high level control devices. Optional thermocouple or RTD configurations are available to provide melt temperature
20mA Output
Dynalarity ±0.2%
Pressure Selection
3:1 Turndown
Hazardous Use
HART Remote
Precise Measurements
DSC/PLC Output
PL'c' Relay
Extra Approvals
SPX5390
The Dynisco SPX 5-Series is a smart 4-20mA pressure transmitter that includes DynalarirtyTM , a Dynisco innovation that uses an advanced algorithm that will linearize offsets due to process effects on the sensor. The SPX 5-Series is an all welded construction designed for use in hazardous locations and is available with a variety of process and electrical connections. These amplified transmitters eliminate the need for external signal conditioning. All models can interface directly with distributed control systems, PLC's, computers, and similar high level control devices. Optional thermocouple or RTD configurations are available to provide melt temperature
20mA Output
Dynalarity ±0.2%
Pressure Selection
3:1 Turndown
Hazardous Use
HART Remote
Precise Measurements
DSC/PLC Output
PL'c' Relay
Extra Approvals
SPX5391
The Dynisco SPX 5-Series is a smart 4-20mA pressure transmitter that includes DynalarirtyTM , a Dynisco innovation that uses an advanced algorithm that will linearize offsets due to process effects on the sensor. The SPX 5-Series is an all welded construction designed for use in hazardous locations and is available with a variety of process and electrical connections. These amplified transmitters eliminate the need for external signal conditioning. All models can interface directly with distributed control systems, PLC's, computers, and similar high level control devices. Optional thermocouple or RTD configurations are available to provide melt temperature
20mA Output
Dynalarity ±0.2%
Pressure Selection
3:1 Turndown
Hazardous Use
HART Remote
Precise Measurements
DSC/PLC Output
PL'c' Relay
Extra Approvals