Submersible level transmitters

Model 590 Detachable Level Transmitter

Model 590 Detachable Level Transmitter

The Model 590 Detachable Level Transmitter allows for a quick sensor swap without the removal of the installed cable. No special tools are required. Simply pull up the sensor, twist the sensor coupling sleeve till it is no longer engaged and then simply separate the two halves.

590 is constructed of stainless steel housing and sensor module, with a polyurethane cable as standard.  Different cable materials and o rings are available.

Use it to measure Liquid Level and Depth for Water and Waste Water applications, at Lift Stations, Reservoirs and Dams, Rivers, Holding Ponds, Wells, In-ground / Above Ground Tanks and with Inventory Tank Gauging.

Ranges from 0-40"WC thru 15 'WC have combined accuracy of +/- .50% FSO

Ranges greater than 15' WC have combined accuracy of +/- .35% FSO

Viatran also offers a complete range of accessories for use in level applications such as a surge protector, cable hangers and weights, meters and junction boxes.

Replacement sensor heads and/or cables can be purchased separately

Inquiry system 

Configure your own product according to your requirements and needs. If you are unsure of the configuration, provide us in the notes the necessary information about the existing sensor or product, even a competitor. We will be happy to help you find an alternative Viatran product. If your request is urgent, let us know. We will do our best to help you resolve this situation to your satisfaction as quickly as possible. If we have all the information, we are able to offer a model with minor differences, which is in stock and you can have another product available the next day.

If you need more information do not hesitate to contact us.

Viatran Configuration Code:


PERFORMANCE

Pressure Ranges 0 - 40" W.C. up to 0 - 835 Ft W.C. (Or equivalent in Meters or PS
  Accuracy [Combined Non-Linearity (BFSL), Hysteresis & Repeatability] For ranges ≥ 15 Ft. W.C. ≤ +/-0.35% FSO
For ranges < 15 Ft. W.C. ≤ +/- 0.50% FSO
  Compensated Temperature Range 32° to 158° F (0 to 70° C)
Operating Temperature Range -4° to 158° F (-20 to 70° C) Note: Medium must not freeze near sensor
  Storage Temperature Range -13° to 158° F (-25 to 70° C)
  Long Term Stability (%FSO) ≤ +/- 0.1% FSO / year (At reference conditions
  Thermal Effect on Zero ≤ +/- 0.8% FSO per 100° F
  Thermal Effect on Span ≤ +/- 0.8% FSO per 100° F

ELECTRICAL

Output Signal
4-20 mA
Supply Voltage
8 -32 Vdc
Power Supply Regulation
< +/- .005% FSO per volt
  Circuit Protection Reverse polarity protected, CE marked
  RFI / EMI CE EMC compliant as per IEC EN 61326
  Voltage Spike Protection Withstand 1000 volt spike per EN 61000
  Response Time <10 mSec

MATERIALS OF CONSTRUCTION

 
Housing
Inconel X750 and 316L stainless steel
Sensor Diaphragm
Inconel X750 and 316L stainless steel
O-ring Seals
NEMA/Type 4X (1P68)
Protective Cap POM (Polyoxymethylene)

MECHANICAL

Pressure Connection
Protective POM cap
Ingress Protection
IP 68
Overpressure Limit
4x Minimum (>525 Ft. range = 3.2x)
  Burst Pressure 5x Minimum (> 525 Ft. range = 4.8x)
  Weight 0.9 lbs. (without cable)

OPTIONS

EA
Special Calibration Run
PW
Calibrate Transmitter with Meter / Display
ZB
1/2" NPT Conduit Adapter