Submersible level transmitters

Model 593 Detachable Level Transmitter

Model 593 Detachable Level Transmitter

The Model 593 Detachable Level Transmitter allows for a quick sensor swap without the removal of the installed cable. No special tools are required. Simply pull up the sensor, twist the sensor coupling sleeve till it is no longer engaged and then simply separate the two halves.

593 is constructed of a 316L stainless steel housing and ceramic sensor module, with a polyurethane cable as standard.  Different cable materials and o rings are available.

Use it to measure Liquid Level and Depth for Water and Waste Water applications, at Lift Stations, Reservoirs and Dams, Rivers, Holding Ponds, Wells, In-ground / Above Ground Tanks and with Inventory Tank Gauging.

Viatran also offers a complete range of accessories for use in level applications such as a surge protector, cable hangers and weights, meters and junction boxes.

Replacement sensor heads and/or cables can be purchased separately

PERFORMANCE

Pressure Ranges 0 - 16" W.C. up to 0 - 335 Ft W.C. (Or equivalent in Meters or PSI)
  Accuracy [Combined Non-Linearity (BFSL), Hysteresis & Repeatability]
≤ +/-0.35% FSO (Standard)
≤ +/-0.25% FSO (Optional)
  Compensated Temperature Range 32° to 158° F (0 to 70° C)
Operating Temperature Range -13° to 257° F (-25 to 125° C) Note: Medium must not freeze near sensor
  Storage Temperature Range -40° to 257° F (-40 to 125° C)
  Long Term Stability (%FSO) ≤ +/- 0.1% FSO / year  At reference conditions
  Thermal Effect on Zero ≤ +/- 0.8% FSO per 100° F
  Thermal Effect on Span ≤ +/- 0.8% FSO per 100° F

ELECTRICAL

Output Signal
4-20 mA
Supply Voltage
9 - 32 Vdc
Power Supply Regulation
< +/- .005% FSO per volt
  Circuit Protection Reverse polarity protected, CE marked
  RFI / EMI CE EMC compliant as per IEC EN 61326
  Voltage Spike Protection Withstand 1000 volt spike per EN 61000
  Response Time < 380 mSec

MATERIALS OF CONSTRUCTION

 
Housing
PP-HT (Polypropylene High Temperature)
Sensor Diaphragm
316L stainless steel
O-ring Seals
FKM (Standard) or EPDM (Optional)
Protective Cap POM (Polyoxymethylene)

MECHANICAL

Pressure Connection
Protective POM cap
Ingress Protection
IP 68
Overpressure Limit
6x Minimum (≥ 134 Ft. range = 3.5x)
  Burst Pressure 1.4 lbs. (without cable)
  Weight 1.4 lbs. (without cable)

OPTIONS

EA
Special Calibration Run
PW
Calibrate Transmitter with Meter / Display
DV
ZB 1/2" NPT Conduit Adapter