Submersible level transmitters

Model 59P Level Transmitter

Model 59P Level Transmitter

The Model 59P General Purpose Level Transmitter has a 1.38" diameter Polypropylene High Temperature (PP-HT) housing and ceramic sensor.  Polyurethane cable is standard.  Different cable materials and o-rings are available.

Use it to measure Liquid Level and Depth for Water and Waste Water applications, Lift Stations, Reservoirs and Dams, Rivers, Holding Ponds, Wells, In-ground / Above Ground Tanks and with Inventory Tank Gauging.

Viatran also offers a complete range of accessories for use in level applications such as a surge protector, cable hangers and weights, meters and junction boxes.

 

PERFORMANCE

Pressure Ranges 0-13 Feet W.C. to 0-335 Feet W.C.
  Combined Accuracy (Non-Linearity, Hysteresis, Repeatability) ≤±0.50% FSO for ranges < 15 Ft. W.C.
  Compensated Temperature Range 13° to 158° F (-25 to 70° C)
Operating Temperature Range 32° to 122° F (0 to 50° C) Note: Medium must not freeze near sensor
  Storage Temperature Range 14° to 122° F (-10 to 50° C)
  Long Term Stability (%FSO) ≤±0.1% FSO / year at reference conditions
  Thermal Effect on Zero ≤±0.8% FSO per 100° F
  Thermal Effect on Span ≤±0.12% FSO per 100° F
Temperature Accuracy ≤±0.12% FSO per 100° F

ELECTRICAL

Output Signal
4-20 mA
Supply Voltage
8 - 32Vdc
Power Supply Regulation
<±005% FSO per volt
  Circuit Protection Reverse polarity protected, CE marked
  RFI/EMI CE EMC cmpliant as per IEC EN 61326
  Voltage Spike Protection Withstand 1000 volt spike per EN 61000
  Response Time <10mSec

MATERIALS OF CONSTRUCTION

 
Housing
PP-HT (Polypropylene High Temperature)
Sensor Diaphragm
Ceramic Al2O3 96%
O-ring Seals
PUR, PVC, or FEP (customer must specify)
Protective Cap FKM or EPDM (customer must specify)

MECHANICAL

Pressure Connection
Open Face
Ingress Protection
IP 68
Overpressure Limit
1.6x Minimum
  Weight 0.5 lbs. (without cable)

OPTIONS

EA
Special Calibration Run
PW
Calibrate item with meter/display