Dry cut

Bullet Series Strand Pelletizer

Bullet Series Strand Pelletizer

The best of both worlds. In order to combine the cutting geometry of the Conair style Model 304 with the innovative features of the Scheer “E-Series” pelletizer, the Bullet Series was created. The merger of the two market leaders in the basic design results in a strand dry cut pelletizer that is easier and faster to clean and service. Designed for 24-hour operation, the unit is ideally suited for both laboratory and production users. The inlet and discharge chutes can be removed without tools, making this pelletizer desirable for compounders that carry out multiple material changes over several times a shift. A large pneumatic cylinder above the upper infeed roller that remains parallel with the lower roller produces a greater uniform pulling force with varying diameter strands for less scrap in production. Higher throughputs, less waste, better product quality, and ease of operation were the goals when designing the strand pelletizer.

Inquiry system 

Configure your own product according to your requirements and needs. If you are unsure of the configuration, provide us in the notes the necessary information about the existing sensor or product, even a competitor. We will be happy to help you find an alternative MAAG products. If your request is urgent, let us know. We will do our best to help you resolve this situation to your satisfaction as quickly as possible. If we have all the information, we are able to offer a model with minor differences.

If you need more information do not hesitate to contact us.

Configuration code


TECHNICKÉ ÚDAJE

  Pelletizer Specifications Bullet-62 Bullet-64 Bullet-66
  Rotor Diameter 6" (150 mm) 6" (150 mm) 6" (150 mm)
  Rotor Width (Nominal) 2" (50 mm) 4" (100 mm) 6" (150 mm)
  Feed Width (Nominal) 1-3/4" (45 mm) 3-3/4" (95 mm) 5-3/4" (145 mm)
  Motor Size (AC Variable Speed) 2 HP (1.5 kW) 2 HP (1.5 kW) 5 HP (3.7 kW)
  Strand Ratings (1/8" or 3 mm Diameter) up to 8 up to 15 up to 25 
  Standard Rotor Speed (Max RPM) 800 800 800
  Stellite Tipped Rotor 14, 20, 36 Tooth 14, 20, 36 Tooth 14, 20, 36 Tooth
  Normal Line Speed Based on Cutting 1/8" Long Pellets 11.5 to 115 FPM  16.5 to 165 FPM  30 to 300 FPM
3.5 to 35 MPM 5 to 50 MPM 9.1 to 91 MPM
  Dual Drive Optional Optional Optional
  Wear Package (for abrasive materials)  Optional Optional Optional
  Maximum Capacity (Lb/hr)  360 Lb/Hr (163.3 Kg/Hr 675 Lb/Hr (306.2 Kg/Hr) 1,125 Lb/Hr (510.3 Kg/Hr