Transducer Mounting Hole Cleaning Tool Kit
Installation of transducers into improperly cleaned or sized holes is one of the major causes of damage to these instruments. With this kit, the .312" tip diameter hole, the 45 degree seating surface, and the .451" hole can be cleaned. The kit includes a gauging plug which is used to verify that the hole has been correctly machined and cleaned. M10 and M18 cleaning kits also available.
Thread cleaning
Prevents damage to the sensor
Maintenance prevention
Melt removal

Transducer Mounting Hole Machining Tool Kit
The Dynisco Transducer Mounting Hole Machining Tool Kit contains all of the necessary drills and taps to prepare a standard 1/2 - 20 UNF transducer mounting hole and the 45 degree seat. All tools included in this kit are made of premium grade, high strength tool steel. Care should be taken in the use of proper speeds and feeds, lubricants, and a method to assure continual alignment of each progressing tool. M10 and M18 kits are also available.
Thread repair
Prevents damage to the sensor
Maintenance prevention
Leak removal

Torque wrench Wera 20 - 100 Nm
Torque wrench Wera 075611 Click-Torque B 2 with switch ratchet 3/8 "(20 - 100 Nm)
Wera Click-Torque torque wrenches are supplied as switch ratchets (with connection dimensions 1/4 ", 3/8", 1/2 "and 3/4") or with clamping for socket tools (9x12 mm, 14x18 mm) for tightening torques from 2.5 Nm up to 1,000 Nm.
All Wera Click-Torque torque wrenches manufactured in accordance with DIN EN ISO 6789 are supplied with a declaration of conformity.
Accuracy ± 3%
DIN EN ISO 6789-1: 2017-07
Ergonomic handle
20 - 100 Nm

Eight-core, shielded cable with threaded Bendix 8pin connector
These cables are used to connect Dynisco pressure sensors to a 6-pin connector. The cables provide the electrical connection between the sensors and the indicators or controllers. The kits consist of a Bendix bayonet connector and a six-core shielded cable.
Six-core cable
Shielded cable
Bayonet connector
6-Pin

Adapters for pressure sensors
Adapter for Dynisco pressure sensors
Reduction for sensors from 1 / 2-20 UNF thread to M10x1.5 or M18x1.5 thread Another variant is the reduction from m10x1.5 to M18x, 15. These adapters are the fastest and most efficient way to turn an available (warehouse) sensor into a full-fledged replacement for a crisis situation.
High quality workmanship
Adapter options
1 / 2-20 UNF -> M10x1.5
M10x1.5 -> M18x1.5

Adapters Button Seal
Process adapters are an accessory to all pressure and temperature sensors, allowing a 1 / 2-20 UNF (Unified National Fine nt) melt pressure sensor to be installed in the mounting port using a flange. The use of the flange is compatible with all sensors of the given dimensions and all manufacturers. Each adapter and sealing elements are made to order depending on the dimensions and mounting port. Flange extensions are available as one-piece constructions or detachable threaded connections. The design of the flange is specific to the one used and depends on the dimensions, thickness and diameter of the mounting screws.
Adaptation of any 1 / 2-20 UNF pressure sensor to the process flange adapter
Can be used with all Dynisco sensors
The flanges can be supplied in one piece, with a thread or a combination of thread and weld
Custom production


Six-core, shielded cable with threaded Bendix 6pin connector
These cables are used to connect Dynisco pressure sensors to a 6-pin connector. The cables provide the electrical connection between the sensors and the indicators or controllers. The kits consist of a Bendix bayonet connector and a six-core shielded cable.
Six-core cable
Shielded cable
Bayonet connector
6-Pin

Digital Scales Kern PCB
Standard laboratory scales with clear display, simple operation and five operating modes. The advantage of this series is the PRE-TARE function (when activated, the stored weight is automatically deducted from the current measured weight).
PRE-TARE function
Determining the percentage
Resolution 0.001 g
Max. load 350 g

Sartorius Quintix digital scales
It belongs to the group of scales with touch control. The biggest advantage of the Quintix series is easy operation via a color touch screen. Serious applications are clearly displayed with icons, as is usual today for "smart devices". Another plus of this series is excellent data communication. Each Quintix scale is equipped with a mini USB data output with Plug & Play technology.
Direct export to LMI
Max. load up to 220g
Internal CAL calibration
Touch bar display
Standard models
Calibrated models

Software Lava Suite
The new LaVa Suite software is now available for the LMI 5000 Series capillary plastometers. It offers complete and easy management when collecting, storing and working with digital data provided by the capillary plastometer. Lava Suite ™ software enables additional generated measurement results, filtering using identifiers and comparison of individual measurements on a larger scale, including time horizons.
Software Blue Control
Software for new UPR indicators and ATC controllers, which simplifies setup and configuration. The big advantage is OFF-LINE configuration and setting simulation, which reduces the risk of interrupting ongoing operations. With a PC, setup is even easier than with next-generation controllers and indicators.
UPR 900
ATC 990
1490
Backup
Simulation
Configuration

Edge Device - Cloud
Integrate and aggregate data from existing Dynisco products such as our LMI5000 & LMI4004 melt flow indexers, our LCR7000 capillary rheometer, and instrumentation like our UPR900 process indicator via the Dynisco Edge Device. With the Edge Device you have a single board computer that helps you better understand and manage:
Iot.Dynisco.com
Multiple user access
Data sharing
Working with results
Online access
Safety
Easy installation
