Continuous filtration system

  1. Continuous filtration system
  2. Injection molding machines

High performance Melt Filters – The ECO Series

The continuous melt filters in the ERF series are suitable for materials with up to 16% by weight contamination and are guaranteed to remain in use for long periods without changing the filter. Our ERF melt filters are capable of processing a wide range of polymers (e.g. LDPE, LLDPE, HDPE, PP, PS, ABS, PC / ABS, TPE, TPU, POM). All solid or elastomer foreign particles such as paper,wood, aluminum, copper, rubber, silicone, or high-melting polymer composites are efficiently removed.
The classic application for ERF melt filters is repelletizing lines, but they are also successfully employed for sheet and profile extrusion. ERF melt filters can in principle be used in any extrusion line – either single or twin-screw and irrespective of the type of pelletizing system or other downstream unit. Three different sizes enable throughputs from 150 to 10,000 kg/h depending on the application.

Suitable for Compounding, Recycling, Extrusion

Fully automatic, continuous operation

Up to 18% contaminants removed

Extremely low melt losses

More reliable processing due to constant pressure at the filter outlet

No need to replace the screen for several weeks, or possibly months, depending on the material and the application

Completely closed system with no entrapped air

Short contaminant residence times in the filter

Very simple replacement of the scraper from outside using a hydraulic cylinder

Elastomers (rubber, silicone) are efficiently filtered and discharged before they have a chance to be forced through the filter screen

CE

High performance Melt Filters - The ERF Series

The continuous melt filters in the ERF series are suitable for materials with up to 16% by weight contamination and are guaranteed to remain in use for long periods without changing the filter. Our ERF melt filters are capable of processing a wide range of polymers (e.g. LDPE, LLDPE, HDPE, PP, PS, ABS, PC / ABS, TPE, TPU, POM). All solid or elastomer foreign particles such as paper,wood, aluminum, copper, rubber, silicone, or high-melting polymer composites are efficiently removed.
The classic application for ERF melt filters is repelletizing lines, but they are also successfully employed for sheet and profile extrusion. ERF melt filters can in principle be used in any extrusion line – either single or twin-screw and irrespective of the type of pelletizing system or other downstream unit. Three different sizes enable throughputs from 150 to 10,000 kg/h depending on the application.

Suitable for Compounding, Recycling, Extrusion

Fully automatic, continuous operation

Up to 18% contaminants removed

Extremely low melt losses

More reliable processing due to constant pressure at the filter outlet

No need to replace the screen for several weeks, or possibly months, depending on the material and the application

Completely closed system with no entrapped air

Short contaminant residence times in the filter

Very simple replacement of the scraper from outside using a hydraulic cylinder

Elastomers (rubber, silicone) are efficiently filtered and discharged before they have a chance to be forced through the filter screen

CE